Function introduction
1. Single touch control switch lamp, and dimming function
2. It can control double street light switch. And dimming

3. Low power consumption of circuit standby

Product parameters
Input voltage: 2.4-7v
Output single channel load: 1.8A
The output load voltage is the same as the input voltage
Standby current: 4-20ua

PCB size: 23 * 14.5mm

Instructions
1. When using, please connect the wire according to the foot position function. Touch the button and paste it to plastic and glass.
2. Each time the power is turned on, the dual LED lights will automatically turn on for 2S and then turn off automatically. Touch the designated position to turn on the 1-way LED (the brightest at this time), and then tap the specified position to turn on the 2-way LED lights (the brightest at this time); long press (2.5s) to adjust the brightness of the two LED lights (from the brightest to the darkest); press and hold (2.5s) again to adjust the brightness of the two LED lights (from the darkest to the darkest) Turn off the LED light by touching the designated position.
3. Single channel dimming can be selected. When two LED lights are on at the same time, you can touch the specified position, and select to turn off one of the LEDs, and the remaining one can be dimming freely, as shown in point 2 above