Function introduction
1. Single touch control switch lamp, and dimming function
2. Continuous power with memory, with backlight display.

3. A style with sudden light, suddenly dark state, B type start gradually light, gradually dark state

Product parameters
Input voltage: 2.5-20v
Output single channel load: 2A
The output load voltage is the same as the input voltage
Standby current: 670ua

PCB size: 23 * 14.5mm

Instructions
1. When using, please connect the wire according to the foot position function. Touch the button and paste it to plastic and glass.
2. Type A: gently touch the designated position, the backlight LED blue light is on, and the load led light (bright state, brightness is 50%) is on, and then gently press the touch specified position, the backlight red light is on, and the load led light is turned off (dark state, to turn off the LED). When dimming is required, touch the specified position, turn on the LED light, press and hold for 2.5s to touch the specified position to adjust the brightness from 50% to the brightest; and then press 2.5s to touch the specified position, from the brightest to the darkest.
3. Press the led to light up (light LED, turn off the backlight, turn off the load light, turn off the LED light, turn off the load light, and then turn on the LED. When dimming is required, touch the specified position, turn on the LED light, press and hold for 2.5s to touch the specified position to adjust the brightness from 50% to the brightest; and then press 2.5s to touch the specified position, from the brightest to the darkest.